Arctic Snow and Ice Products

The All New

Sectional Sno-WingTM

Finally, an adjustable wing-plow that has nearly all the advantages of an Arctic Sectional Sno-Pusher^™ and an Arctic Sectional Sno-Plow^™ (Power Angle Plow) all in one unit. There are other wing-plows on the market, but none of them offers Arctic’s patented and unmatched true-Sectional features and benefits, which allows the plow to self-level and contour to the pavement, trip over obstacles, and sheer-off hardpack snow and ice, scraping down to bare pavement in a single pass! Arctic is often copied, but Never Duplicated!

Sectional Sno-WingTM

Features

Arctic Sectional Technology
- Independent Sectional Moldboards
- Forgiving, impact absorbing polyblock design
- Pin-in-place, pivoting Slip-Hitch mounting system
- AR400 spring-loaded tripping cutting edges
Free Floating Wings
- Hydraulically adjustable between plow-mode and pusher-mode
- Trip cutting edge
- Floating, AR400 spring-loaded tripping cutting edge on each wing, that conform to the pavement and scrapes to the ground.
Hydraulic Power Angling

Plow hydraulically angles up to 25 degrees per side
Identical Hydraulic Hoses

All hydraulic hoses are identical. Making repairs and part stocking simple.

(Except for the main hose whips that run to the machine)
14-Pin Electrical Connector

14 pin electrical connector comes as standard.

(Electrical wiring harness adapters may be required to plug the Arctic Sectional Sno-Wing Harness into certain machines that do not support the standard 14 pin connection.)
Slip-hitch™ Universal coupler System

Allows for quick & easy changeover to any quick connect couplers or bucket mounts to fit any equipment manufacturer’s mounting system. It floats up and down independently from the machine, and automatically self-levels the pusher. It also allows the machine to keep all four tires on the ground for full traction.

Individual sectioned moldboards

Allows the pusher to contour to the surface for cleaner passes. Each moldboard section independently floats up to 9 inches over obstacles, as well as dipping into depressions.
Steel Spring-Loaded trip Cutting Edges

Steel cutting edges scrape compacted snow and ice down to the pavement. The spring-loaded design allows the cutting edge to trip back on pavement anomalies up to 4 inches in height.
AR400 Steel Wear Shoes

The wear shoes lay flat on the surface to prevent premature wear while also skiing over obstacles and protecting side panels from impacts.
Mechanical side panels

The patented design of the Sectional Sno-Pusher™ features mechanical side wings that lift up to 9 inches high to glide over and around obstacles, providing 75% higher clearance height than competitive models. This feature also allows you to clean curb lines quickly and completely.
Polyurethane mounting blocks

Secure each moldboard section to the pusher’s mainframe, absorbing impact to protect the pusher, machine and operator. The “polyblocks” are key to allowing each section to contour to pavement variations and scrape down to the bare surface in a single pass. They also provide the operator the ability to apply variable down pressure to easily remove ice or hardpacked snow.
Slip-hitch™ Universal coupler System

Allows for quick & easy changeover to any quick connect couplers or bucket mounts to fit any equipment manufacturer’s mounting system. It floats up and down independently from the machine, and automatically self-levels the pusher. It also allows the machine to keep all four tires on the ground for full traction.